Announcement

Collapse
No announcement yet.

setting riser height

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • setting riser height

    Randy

    I'm trying to set riser heights. According to some discussions if I use F5 after highlighting the riser and poibnt to the the track element it should cut at proper height. But doing this the track element will not highlight since it is not the active window. Is their a way to accomplis this action.

    Fred Abrew

  • #2
    Re: setting riser height

    I tried this feature in a number of manners, and it appears to work fine. What do you mean by "not in the active window"? The riser should typically be fairly near the track in question by design, and, you can use the scroll bars after pressing F5.

    Comment


    • #3
      Re: setting riser height

      Randy,

      You are absolutely right. I found that I did not have the right layer active which created the problem. In my haste I fired off the question without checkingwhere I was. Thanks for the quick response. This program is absolutely the most interactive drawing program I have worked with.

      Fred Abrew

      Comment

      Working...
      X